Complete removal of the gear shift lever (Aprilia RS125/3)
- Main
- Aprilia
- RS-series
- RS 125 [3]
- Running gear and frame
- Frame and hinged elements
- Complete removal of the gear s…
Contents: Partial removal ↓ Complete removal ↓
Torque wrench settings:
Undo and release the nut (1).
Slide the actuating rod off the lever.
Undo and remove the nut (2).
Remove the gear shift lever and collect spindle (3) and Belleville washer.
Remove the left fairing; see 7.1.2.
Slacken the screw (4) and withdraw the gearbox link rod.
Undo and remove the nut (2).
Remove the complete gear shift lever and collect spindle (3) and Belleville washer.
- Nut (1): 5 Nm (0.5 Kgm)
- Screw (4): 10 Nm (1.0 Kgm)
Partial removal
Undo and release the nut (1).

Slide the actuating rod off the lever.
Undo and remove the nut (2).
Remove the gear shift lever and collect spindle (3) and Belleville washer.
Complete removal
Remove the left fairing; see 7.1.2.
Slacken the screw (4) and withdraw the gearbox link rod.

Undo and remove the nut (2).
Remove the complete gear shift lever and collect spindle (3) and Belleville washer.
See this article in russian language
This article has been reviewed: Artemy Kuzmin
Similar articles about motorcycles of other brands
Removing and installing gear-shift lever BMW R 1150 GS (1999-2004)Gear shift lever Harley-Davidson V-Rod (2002-2006)
Removing the gear change lever, the sprocket cover and the… Ducati ST2 (1997-2003)
Gear Shift Pedal — Removal, Installation and Adjustment Honda CB 400 SF (1992-1999)
Shift fork/gear groove wear Kawasaki ZX6R/ZX600J (2000-2002)
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Cooling and lube system
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system
