Front fork component inspection (Aprilia RS125/3)
- Main
- Aprilia
- RS-series
- RS 125 [3]
- Running gear and frame
- Front suspension and handlebar
- Front fork component inspectio…
Contents: Stanchion tube ↓ Slider ↓
Read 1.2.1 carefully.
Inspect the sliding surface for scoring and/or scratching. Eliminate minor scoring with wet sand paper (grain size 1).
Replace the stanchion (1) if badly scored.
Check for stanchion (1) buckling using a dial gauge.
Replace the stanchion if buckled beyond the service limit.
Service limit: 0.2 mm.
Inspect for damage and/or cracking. Replace if damaged.
Check the condition of the slide bushes (2).
Change any component which is badly worn or damaged.
Renew the following components on assembly:
Stanchion tube
Inspect the sliding surface for scoring and/or scratching. Eliminate minor scoring with wet sand paper (grain size 1).
Replace the stanchion (1) if badly scored.
Check for stanchion (1) buckling using a dial gauge.

Replace the stanchion if buckled beyond the service limit.
Service limit: 0.2 mm.
Danger! Never attempt to straighten a buckled stanchion as this would weaken the overall structure leading to a dangerous riding condition.
Slider
Inspect for damage and/or cracking. Replace if damaged.
Check the condition of the slide bushes (2).

Change any component which is badly worn or damaged.
Warning! Clean off any debris collected by the bushes taking care not to scratch the bush surface.
Renew the following components on assembly:
- oil seal (3);
- dust seal (4);
- top cap O-ring (5).
See this article in russian language
This article has been reviewed: Artemy Kuzmin
Similar articles about motorcycles of other brands
Technical Data of front fork BMW K 1200 LT (1998-2009)Front fork adjustment Ducati ST2 (1997-2003)
Replacing front fork oil Harley-Davidson V-Rod (2002-2006)
Front Fork Legs — Oil Change Honda CB 400 SF (1992-1999)
Front fork dust seal — inspection Kawasaki ZX6R/ZX600J (2000-2002)
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Cooling and lube system
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system
