Removing the rear direction indicators (Aprilia RS125/3)
- Main
- Aprilia
- RS-series
- RS 125 [3]
- Electric equipment
- Equipment and devices
- Removing the rear direction in…
Read 1.2.1 carefully.
Remove the number plate bracket but leave it attached to the wiring; see 7.1.13.
Disconnect the pair of connectors (1) of the direction indicator you wish to remove. Look at the colour to identify the connectors:
Release and remove the screw (2).
Remove the direction indicator.
The original article is posted on the website motoinst.ru
Remove the number plate bracket but leave it attached to the wiring; see 7.1.13.
Disconnect the pair of connectors (1) of the direction indicator you wish to remove. Look at the colour to identify the connectors:
- Right indicator: red-blue
- Left indicator: light blue-blue
Release and remove the screw (2).
Remove the direction indicator.
The original article is posted on the website motoinst.ru
See this article in russian language
This article has been reviewed: Artemy Kuzmin
Similar articles about motorcycles of other brands
Rear direction indicators — removal Triumph Street Triple 765 (2017-2024)Removing and installing taper roller bearing in rear wheel… BMW R 1150 GS (1999-2004)
Removing the rear brake cylinder support and rear brake… Ducati ST2 (1997-2003)
Removing and installing the rear wheel Honda VTX 1800 C (2001-2008)
Removing the rear brake pads Yamaha FZ1 Fazer (2006-2015)
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Cooling and lube system
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system