Fuel tank removal (Aprilia RS125/3)
- Main
- Aprilia
- RS-series
- RS 125 [3]
- Engine and systems
- Fuel system
- Fuel tank removal
Read 1.2.1 carefully.
Torque wrench settings:
Lift the fuel tank; see 2.9.1.
Withdraw the fuel hose (1) from the carburetor.
[This article is taken from a source: Motoinst.ru]
Cut the ties and withdraw the fuel tank drain hoses.
Remove the rod and lower the tank.
Undo the nut (2) and remove the screw (3).
Collect the washer (4), the two grommets (5) and the back spacer (6).
Remove the fuel tank.
Torque wrench settings:
- Fuel tank rear mounting bolt (3): 7 Nm (0.7 Kgm).
Note. It is not necessary to drain the fuel.
Lift the fuel tank; see 2.9.1.
Withdraw the fuel hose (1) from the carburetor.
[This article is taken from a source: Motoinst.ru]

Cut the ties and withdraw the fuel tank drain hoses.

Remove the rod and lower the tank.

Undo the nut (2) and remove the screw (3).
Collect the washer (4), the two grommets (5) and the back spacer (6).

Remove the fuel tank.
See this article in russian language
This article has been reviewed: Artemy Kuzmin
Similar articles about motorcycles of other brands
Fuel tank and lines specifications BMW R 1150 GS (1999-2004)Raising the fuel tank Ducati ST2 (1997-2003)
Kilometers corresponding to the amount of fuel in the tank Harley-Davidson V-Rod (2002-2006)
Fuel tank — removal and installation Honda CB 400 SF (1992-1999)
Fuel tank — inspection Kawasaki ZX6R/ZX600J (2000-2002)
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Cooling and lube system
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system
