Rear swinging arm inspection (Aprilia RS125/3)
- Main
- Aprilia
- RS-series
- RS 125 [3]
- Information for owner
- Maintenance
- Rear swinging arm inspection
Periodically check that the nut-and-spindle assembly and the needle roller bearings of the swinging arm are properly tightened.
Inspection procedure:
Place the motorcycle on the front service stand (OPT); see 1.7.1.
Remove the fuel tank; see 4.1.1.
Fix the slings to the frame at the engine top mounting point.
Lift hoist arm until stretching the slings taut.
The original is published on an online portal (MOTOINST.ru)
Push and pull the rear wheel up and down, then rock it from side to side. If you feel any play, adjust the swinging arm; see 2.17.3.
If this fails to eliminate play, change the bearings; see 7.11.2.
Inspection procedure:
Place the motorcycle on the front service stand (OPT); see 1.7.1.
Remove the fuel tank; see 4.1.1.
Fix the slings to the frame at the engine top mounting point.
Lift hoist arm until stretching the slings taut.
The original is published on an online portal (MOTOINST.ru)
Push and pull the rear wheel up and down, then rock it from side to side. If you feel any play, adjust the swinging arm; see 2.17.3.
If this fails to eliminate play, change the bearings; see 7.11.2.
See this article in russian language
This article has been reviewed: Artemy Kuzmin
Similar articles about motorcycles of other brands
Removing rear swinging arm BMW R 1150 GS (1999-2004)Removing the rear suspension rocker and swinging arm Ducati ST2 (1997-2003)
Rear view mirrors Harley-Davidson V-Rod (2002-2006)
Rear wheel — removal and installation Honda CB 400 SF (1992-1999)
Rear wheel — removal and installation Kawasaki ZX6R/ZX600J (2000-2002)
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Maintenance
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Cooling and lube system
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system
