Engine running-in (Aprilia Shiver 750)

0

Engine run-in is essential to ensure engine long life and correct operation. Twisty roads and gradients are ideal to run in engine, brakes and suspensions effectively. Vary your riding speed during the run-in. This ensures that components operate under both "loaded" and "unloaded" conditions, allowing the engine components to cool.

Caution! The full performance of the vehicle is only available after the service at the end of the run-in period.

Follow the guidelines detailed below:

Do not twist the throttle grip abruptly and completely when the engine is working at a low

revs, either during or after run-in.

During the first 100 Km (62 miles) use the brakes gently, avoiding sudden or prolonged braking. That is to permit the adequate adjustment of the pad friction material to the brake discs.

Caution! After the specified mileage, take your vehicle to an official Aprilia dealer for the checks indicated in the "after-run-in" table in the scheduled maintenance section to avoid injuring yourself, others and /or damaging the vehicle.

(The original text can be found on the website: Motoinst.ru)

See this article in russian language

Running in the engine Yamaha FZ1 Fazer (2006-2015)
Checking engine oil when engine is cold, topping up if… BMW R 1150 GS (1999-2004)
Engine — description and specification Ducati ST2 (1997-2003)
Tachometer (engine speed indicator) Harley-Davidson V-Rod (2002-2006)
Starting the engine Honda CB 400 SF (1992-1999)